产品导航

1.变压器测试类
2.耐压试验设备
3.计量测试设备
4.线路测试设备
5.二次回路设备
6.轨道机电检测
7.油气检测仪器
8.环境监测仪器
9.光电测试设备

联系方式


武汉艾尔通电气有限公司

销售热线:
   027- 8841 2886
   0159 2760 1691

技术支持:
   0137 2018 1564


Q Q/MSN:
      
邮箱地址:kppat@163.com

产品中心

AL708 SF6回收装置 SF6 recovery.

[艾尔电气  SF6回收装置  执行标准]

 

JB/DQ2588-90

 

[艾尔电气  SF6回收装置  产品简介] 


        SF6气体作为一种绝缘气体,具有无毒、不可燃,以及良好的绝缘特性,其绝缘强度大大高于传统的绝缘气体,并具有良好的灭弧性,因此广泛应用于SF6电器。由于SF6气体价格昂贵,且在电弧、电火花和电晕放电的作用下,会分解产生有毒成份。因此SF6电器设备应用时需要将SF6气体回收。本装置就是为了制造和维修SF6电器设备时,回收和充加SF6气体的一种专用设备。

 

 

[艾尔电气  SF6回收装置  产品特征]   

 

设备设计合理,回收快,净化彻底。

 

[艾尔电气  SF6回收装置  产品参数] 

 

1、回收:回收初压力≤0.8MPa,回收终压力≤1KPa;回收时间:对初压力0.8MPa1 m3 SF6气体容积,回收至终压力1KPa,回收时间小于3小时;

2、充气:对初压力133Pa1 m3 SF6气体容积充至0.8MPa,充气时间小于0.5小时;

3、抽真空:装置极限真空度小于等于10 Pa,对初压力为0.1MPa1 m3 SF6气体容积抽真空至133Pa所需时间小于0.8小时;

4、贮存:贮存容器容积0.051m3名义液态贮存量50kg,高贮存压力3.8 MPa

5、净化:对含水量1000PPM(体积比)以下的SF6气体,经本装置一次回收净化 后,水份小于8PPM(重量比),油份小于10PPM(重量比);

6、年泄漏率:≤1%名义储存量;

7、噪声:≤75dB(A)声压级;

8、工作环境温度  -10°—40℃;

9、功率:≤7KW

10、电源:三相交流  50HZ 380V±10%

11、重量:约500 kg

12、外形尺寸:1450×810×1200mmm

 

 

[艾尔电气  SF6回收装置  产品选型] 

 

根据用户具体要求,设计相应的产品配置方案。

 

AL708 SF6 recovery.
Performance standards:
JB/DQ2588-90.
Product Characteristics:
Equipment design is reasonable, fast recovery, clean thoroughly.
Product parameters:

1, recovery: recovery of initial pressure ≤ 0.8MPa, the final pressure recovery ≤ 1KPa; recovery time: the initial pressure 0.8MPa of 1 m3 SF6 gas volume, recovery to the final pressure 1KPa, recovery time is less than 3 hours.
2, inflatable: the initial pressure of 133Pa of 1 m3 SF6 gas volume sufficient to 0.8MPa, inflation time of less than 0.5 hours.

3, vacuum: vacuum device limit is less than equal to 10 Pa, on the initial pressure of 0.1MPa for 1 m3 SF6 gas volume evacuated to 133Pa time less than 0.8 hours.

4, Storage: storage container volume of 0.051m3, the name of the liquid storage capacity of 50kg, the high storage pressure of 3.8 MPa.
5, clean: the water content 1000PPM (volume ratio) following SF6 gas, purified by a recovery of the device, the water is less than 8PPM (weight ratio), oil is less than 10PPM (weight) .
6, the annual leakage rate: ≤ 1% nominal storage capacity.

7, Noise: ≤ 75dB (A) sound pressure level.
8, the working temperature -10 ° -40
.
9, the power: ≤ 7KW.
10, power supply: three-phase AC 50HZ 380V ± 10%.
11,
Weight: about 500 kg.
12, Dimension: 1450 × 810 × 1200mm.